| Customization: | Available |
|---|---|
| Application: | Automatic Doors, Led Products, Household Appliances |
| Battery Type: | Button Battery |
|
Still deciding? Get samples of US$ 12/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A. Feature
1. You can choose bistable (continuous ouput) or monostable( momentary output) directly when learning code with remote control.
2. The receiver is use-friend. We can produce them with different code remote control as your request .the receiver is widely used as motorcycle alarm receiver, electric vehicle alarm receiver, sliding gate receiver, auto gate receiver, sliding door receiver, rolling door receiver, ceiling fan receiver etc.
B. Function
LED
Green LED for power indication
Red LED for learning code indication
Learning code
S1 for learning button of Monostable
S2 for learning button of Bistable
Learning code with Monostable:
1st relay: Press S1 1 time, red LED light (about 1second) to flash 1 time to light ( receive the signal from remote control).
2nd relay: Press S1 1 time, red LED light (about 1second) to flash 2 times to light ( receive the signal from remote control).
3rd relay: Press S1 1 time, red LED light (about 1second) to flash 3 times to light ( receive the signal from remote control).
4th relay: Press S1 1 time, red LED light (about 1second) to flash 4 times to light ( receive the signal from remote control). Now keep the remote control and receiver close, press any button of the remote control, the red LED will off and relay close if have learnt the code from remote control successfully, if remote control not receive the signal in 5s, the red LED is off automatically which exit learning code mode
Learning code with Bistable:
1st relay: Press S2 1 time, red LED light (about 1second) to flash 1 time to light ( receive the signal from remote control).
2nd relay: Press S2 1 time, red LED light (about 1second) to flash 2 times to light ( receive the signal from remote control).
3rd relay: Press S2 1 time, red LED light (about 1second) to flash 3 times to light ( receive the signal from remote control).
4th relay: Press S2 1 time, red LED light (about 1second) to flash 4 times to light ( receive the signal from remote control). Now keep the remote control and receiver close, press any button of the remote control, the red LED will off and relay close if have learnt the code from remote control successfully, if remote control not receive the signal in 5s, the red LED is off automatically which exit learning code mode
(3): Remove code: Long press S1 or S2 for 5s, when the red LED flash then turn off, which means remove the code successfully
Note: If remove the code careless, the unit system can't resume it.
Company Backgroud:
Quanzhou Juhui Electronic Co., Ltd.is a high-tech company that specializes in designing, manufacturing and selling Alarm system ,wireless RF receiver , RF Remote control , RF module transmitter , Remote Control Duplicator. etc.There are more than 150 designs for your choice ,aiming at expanding large worldwide market .
FAQ:
1.What frequency do you need?
433.92 Mhz or 315 Mhz or 868MHz
2.What encode do you need?
rolling code : HCS301, HCS300, HCS200 etc. learning code: PT2240, EV1527 etc.
3. How can i pay for products?
Payment: T/T ,Paypal ,Western Union.
4. Do your products carry warranty?
Yes, 6 month or more and permanent service.
){kind=link}