| Customization: | Available |
|---|---|
| Output Signal Type: | IR Infrared Sensor |
| Production Process: | Integration |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Reflective infrared photoelectric tube
Used to detect obstacles in the installation of automatic doors and gates, preventing collisions with the door/gate. They consist of an infrared transmitter module (TX) and a receiver module (RX). If a person or object obstructs the beam emitted by the transmitter (TX) (or if the beam fails to reach the receiver due to a setup failure or loss), the receiver (RX) will activate the corresponding relay and notify the installation control unit.
Product application:Lifting doors, revolving doors, sliding doors, wall safety protection, window balcony safety, warehouse safety, parking lots, and other outdoor safety locations.
Product installation and precautions:
1) Please operate within the maximum detection range.
2) Install the reflector in a suitable position, facing the sensor.
3) Adjust the sensor position according to the reflector, aligning the sensor with the center of the reflector. [During initial installation and debugging, first secure the sensor, align the reflector with the sensor, and then move the reflector from near to far to the desired position.]
4) Do not power the sensor until all electrical connections are completed.
5) During debugging and installation, avoid the product's blind spots [unable to sense obstacles in blind spots].
Installation:
(1) Install the receiver (RX), avoiding direct sunlight (infrared radiation).
(2) Choose the positions for the transmitter and receiver devices. These two modules should be aligned as closely as possible.
(3) The installation height of the photoelectric tube depends on the installation situation (generally recommended to be installed below 300mm from the ground and below 200mm from the door leaf).
(4) Connect the power supply. When the receiver correctly receives the beam emitted by the transmitter, the normally closed contact remains closed, and the LED light is off. When the beam is interrupted, the normally closed contact opens, and the LED light turns on.
Packaging and delivery
Notice - PACKING
1) Standard packaging: each product in a plastic bag or small white box, one box as inner box, outer as carton.
2) OEM packaging is acceptable. Multiple shipping terms for you to choose from!
Notice - Delivery
1) You can choose any of the shipping methods listed above, and we are happy to provide suggestions if needed.
2) The buyer is responsible for any taxes and duties charged in their country/region.
Quanzhou Juhui Electronic Co., Ltd...Is a high-tech company that specializes in designing, manufacturing, and selling Alarm systems, motorcycle power locks, wireless RF receivers, RF Remote control, Remote Control Duplicator, Our alarm systems are widely used in every brand motorcycle and electric vehicles. There are many products at different prices for your choices. Our company's professional R&D staff can meet your different requests. We provide different kinds of products with high quality and favorable prices. We are still developing and designing new products according to market demand. We stick to management principles: Quality first, service first, continuous improvement and innovation. Our quality objective is "zero defects, zero complaints". We hope to promote mutual benefit and build long-term business with customers all over the world by joint efforts.
){kind=link}